AD9352-5/PCBZ【PDF 1/2 页】EVALUATION BOARD

收藏本站

您好，
买卖IC网欢迎您。
请登录
免费注册

买卖IC网

Sheet目录1193

[1页]2页

WiMAX RF

MxFE Transceiver

AD9352-5

FEATURES

RF transceiver with integrated ADCs and DACs

Frequency: 4.9 GHz to 6.0 GHz

3.5 MHz < BW < 20 MHz

FUNCTIONAL BLOCK DIAGRAM

AD9352-5

ADC

Superior receiver sensitivity with an NF of 4.5 dB

Highly linear and spectrally pure transmitter

Tx EVM: ?36 dB

Tx noise floor: <?134dBm/Hz

Autonomous automatic gain control (AGC)

Automatic frequency correction: <0.012 ppm

Integrated fractional-N synthesizer

28 Hz local oscillator (LO) step size

Integrated phase noise: <0.8°rms

APPLICATIONS

ADC

DAC

TxNRx

DATA

SYNC

SYNC_VALID

CPE

BWA/WiMAX infrastructure

RADIO

SWITCHING

GPO

CLK/LO

SYNTH

DATA

REF_XTAL

Wireless backhaul

Radar detect

LDOs

CTRL

CTRL AUX_ADC AUXDAC

Figure 1.

GENERAL DESCRIPTION

The AD9352-5 is a fully integrated transceiver for IEEE 802.16

WiMAX wireless network systems. The RF MxFE? combines

the RF front end with mixed-signal baseband enabling and

easy-to-use digital interface to the baseband ASIC or FPGA.

The AD9352-5 operates in the 4.9 GHz to 6.0 GHz range

covering most of the licensed and unlicensed bands. Channel

bandwidths of 3.5 MHz, 4.375 MHz, 5 MHz, 7 MHz, 8.75 MHz,

10 MHz, 14 MHz, 17.5 MHz, and 20 MHz are supported.

The direct-conversion receiver has state-of-the-art noise figure

and linearity and requires no external components except a

balun. The complete RF subsystem integrates an autonomous

AGC loop and dc offset corrections, thus eliminating the need

for high speed interaction with the baseband processor. The

received signal strength indicator (RSSI) has over 80 dB of

dynamic range with 0.5 dB resolution and is accessible via the

serial interface.

The received signal is digitized with a high dynamic range

12-bit ADC. Decimation and channel filters produce a 10-bit

output signal at the appropriate sample rate determined by the

interpolates it before converting it to the analog domain and

upconverting it to the carrier frequency.

The highly linear transmit path has excellent spectral purity

with sideband noise less than ?134 dBm/Hz at 22 MHz offset

and offers an EVM of ?33 dB at 0 dBm output power.

The reference frequency is produced by an internal crystal

oscillator with digital programmable frequency with 0.012 ppm

resolution, thus reducing the total bill of materials of the device.

An internal auxiliary ADC and two auxiliary DACs are

available for system monitoring and control. Three general-

purpose I/Os are also included and can be register programmed

or automatically sequenced by a user-defined state machine.

Mode control is available via a 4-wire serial port and four real-

time I/O control pins.

The AD9352-5 is powered from a single 3.3 V supply and

contains on-chip LDOs for each function to eliminate external

regulators. The AD9352-5 is packaged in a 9 mm × 9 mm,

64-lead LFCSP.

bandwidth mode. The transmit path takes 10-bit input data and

For more information on the AD9352-5, contact Analog Devices, Inc. at: wimaxtransceivers@analog.com .

Rev. Sp0

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781.329.4700 www.analog.com

发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

*型号	*数量	厂商	批号	封装

添加更多采购

采购需求

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

我的联系方式